SERIES 2500-1

ELECTRIC-HYDRAULIC OUTBOARD MOTOR BRACKET

Worlds' first affordable electric-hydraulic powered auxiliary outboard motor bracket.

Perfect for those heavy 4 stroke outboards that spring assisted brackets just can’t lift!
Designed specifically for sailboats and auxiliary motors on powerboats.
Effortlessly raises and lowers outboard motors in less than 20 seconds!

Infinitely adjustable! Great for fishing in the shallows!

NOW WITH NEW POLY MOUTING BOARD!!! This Improvement has long been in the works here at JR Marine Products!! We are proud to offer our customers with a UV-stabalized injection molded poly mouting board! (Note pictures still reflect wood board.)

Structure:
Stainless Steel hardware and self lubricating polymer bearings make this bracket completely maintenance-free! Heavy duty 6061-T6 extruded structural aluminum means high-strength with no weak welds to break!

Mounting Board:
NOW WITH NEW POLY MOUTING BOARD!!! This Improvement has long been in the works here at JR Marine Products!! We are proud to offer our customers with a UV-stabalized injection molded poly mouting board!

Power:
Our self contained electric-hydraulic actuator is made of 100% non-ferrous materials' and is totally submersible. It contains a no-leak seal and wiper seal that keeps water and salt build up out of the working parts. Works on any standard 12 volt system. Unit has a push/pull strength of over 7000lbs.

Mounting Area:
Mounts in any clear area at least 8” wide by 11.5” tall of moderately flat surface. Have a severe curve on your boats' transom? No problem! Let us know and we will throw in a package of mounting shims to help with your installation.

Mounting Holes:
Two sets of 5/16” holes are made so you can fine tune the positioning of your bracket without drilling new holes!

Protective Finish:
The entire bracket is star blasted, then coated with 2 coats of marine grade powder coat.

Includes

1. Wiring Harness – fully assembled .
   1. One (1) Marine sealed rocker switch with 5amp fuse protection and 16ft lead wire.
   2. Two (2) 40/30amp marine solenoids.
   3. One (1) 40amp marine inline circuit breaker.
   4. 8ft connection cable between battery and bracket.
2. Bracket with electric-hydraulic actuator – fully assembled.
3. Four (4) 3"x 5/16” Stainless mounting bolts.
4. Mounting instructions and diagrams.

Check out a few of these custom brackets. All based on the Series 2500!

info@jrmarineproducts.com

HOME